#5/ Halyards and sheets. Special Refitting. Time for change. Ten questions in ten episodes.
THE PERFECT GIFT!
Give or treat yourself to a subscription to the print + digital Journal of Sailing and for only 69 euros a year you get the magazine at home plus read it on your PC, smartphone and tablet. With a sea of advantages.
Aimed at episode number five in the world of refitting, we return to the deck to deal with sheets, halyards and lines.
5.Halyards and sheets: which material is best to invest in?
The rigging on board (sheets, halyards and ropes) can be upgraded with the latest materials such as Dyneema. Halyards, sheets, and all shipboard lines are as important as a sail, and quality ones make you sail better. Take as an example a 12-meter boat that has a mast of 17 and a halyard at least 45 to 50 meters long. If with a standard material, such as polyester, you use a 12-mm halyard, with a “hi-tech” Dyneema-type material, you can have the same, if not higher, breaking loads with an 8-mm halyard. So less weight and more hold. A “hi-tech” top, in addition to being smaller in diameter, saves quite a bit of weight along the shaft for the same load; in the example above, the saving is about 30 percent. Less weight along the mast results in less heeling, less roll at anchor, and therefore more comfort.Why do you need to change the lines if they still look good? Simple, the ropes do not have infinite life, and over time, they drastically lose their load and elongation resistance properties. Halyards, sheets, and all shipboard lines are just as important as a sail and all rigging, and if they are of quality, they help you sail better and safer. For example: a 12-meter boat that has a mast of about 17 meters has a halyard that is at least 45 to 50 meters long. If with a standard material, such as polyester, you use one with a 12-mm diameter, with a “hi-tech” material, such as Dyneema, you can have the same, if not higher breaking loads with an 8-mm halyard. So less weight and more hold. The importance of shipboard rigging is often underestimated: however, a good quality line, allows the sails to be better adjusted and take advantage of every puff of air. Each material from which the ropes are made has a special property: it resists loads better, stretches little, does not suffer from ultraviolet rays, etc. These characteristics are achieved, however, not only by the choice of the noblest material, but depending on how the ropes are processed and woven together. And each is designed to play a specific role.
WHAT SHOULD THE TOPS LOOK LIKE?
Halyards must withstand significant and stable loads for a long time. They suffer abrasion at the rubbing points of pulleys and diverters. They should not be stretched. The top of the rollafiocco always stays in the sun and is the one that gets the most wet with seawater. The important thing is that it remains soft over time and that the sock is weather resistant. Headsail sheets must withstand high and discontinuous loads. They must not stretch and must resist continuous abrasion caused by sliding between blocks and winches. The stocking needs to be soft, since it is almost always operated with bare hands, but it also needs to maintain a good grip on winch stoppers. The mainsail sheet bears a high load, but thanks to a series of hoists, it is usually well distributed over several points on the line. Since you never disarm, you should consider a sheet that will withstand weathering. Other rigging such as borose, tesabase, vang always remain rigged. Apart from the tesabase, they do not suffer excessive loads, but must remain manageable even after long exposure to sun and saline. Look at the tables at the bottom and get an idea:
Share:
Are you already a subscriber?
Ultimi annunci
Our social
Sign up for our Newsletter
We give you a gift
Sailing, its stories, all boats, accessories. Sign up now for our free newsletter and receive the best news selected by the Sailing Newspaper editorial staff each week. Plus we give you one month of GdV digitally on PC, Tablet, Smartphone. Enter your email below, agree to the Privacy Policy and click the “sign me up” button. You will receive a code to activate your month of GdV for free!
You may also be interested in.
Not just ports and marinas: here’s where floating docks are being installed in Italy
More and more ports and marinas are deciding to renovate their operations with floating docks: more modern, flexible and sustainable. Ingemar is the world’s leading floating structure design company, which has contributed to the modernization of many in the Mediterranean
Now you have the incentive if you buy an electric motor
Incentives are coming for the purchase of a marine electric motor. After years of vain waiting, bureaucratic delays and the feeling of being practically “invisible” in the eyes of the government in that much-ballyhooed race for “ecological transition,” a
Sail-pod 25 kW: electric, Italian, environmentally friendly. For sailboats from 12 m!
Italian company Velettrica has come up with Sail-pod 25 kW, a innovative electric propulsion system with a hi-tech propeller that works like a normal propeller, but at the same time allows for energy recovery when the boat is propelled by
Here are the right self-inflating jackets to sail safely
Self-inflating jackets are personal protective equipment that ensure the safety of the entire crew. Just as we wear helmets when we ride motorcycles, when we are sailing life jackets and can mean the difference between life and death. By wearing